How to Clean Carpets and Choose Carpet Steam Cleaner

How to Clean Carpets and Choose Carpet Steam Cleaner

It's time to clean your house. Carpets tend to attract dirt, stains and animal hair as well as mold and mildew. Properly caring for your carpet will prevent dust mites, fleas and carpet bugs from moving in. Read on for information on everyday carpet maintenance, odor removal and deep cleaning techniques.

1. Vacuum regularly. Invest in a good vacuum that sucks up dirt from deep within the carpet fibers, especially if you have a shaggy carpet or you live with cats and dogs. Vacuuming regularly keeps your carpet looking and smelling fresh.
- Vacuum several times a week. If you have pets, you may need to vacuum every day.
- Don't rush the vacuuming process. Even high-powered vacuums need a moment to grab dust, dirt and fur from the base of the carpet fibers. Run the vacuum over the carpet more than once to ensure it is completely clean.
2. Protect heavily-traveled areas of the carpet. If your carpeting reaches your front door, kitchen, or other areas of your home that tend to get a lot of traffic, consider protecting those areas with throw rugs or plastic carpet protector mats. That way you won't be struggling to clean up clots of dirt and bits of grass with the vacuum cleaner every day.
- Plastic carpet protector mats have the added bonus of allowing the carpet to be visible through the clear plastic. They are an inconspicuous way to protect your carpet from dirt.
- Use carpet runners in hallways, which tend to get a lot of foot traffic.
3. Clean up spills right away. Letting spills soak into your carpet and dry makes it much harder to remove the residue. If you can get to a spill right after the accident, you'll save a lot of time later.
- Use a clean cloth or paper towels to absorb the spill, then pour baking powder over the area and let it sit for 15 minutes. When the spill is completely dry, vacuum it up.
- If wine or another colorful liquid is spilled, add a little club soda before sprinkling on the baking soda.
4. Know the right technique for removing older stains. Sometimes its impossible to get to a stain right away. If you're faced with an old wine or coffee stain, don't panic; many carpets are pre-treated with stain resistant chemicals, so stains aren't usually difficult to remove. Use a spray bottle full of vinegar to lightly spray the area, then wipe it with a cloth. For deeper stains, saturate the area with vinegar or carpet cleaner, sprinkle with baking soda, and vacuum the area once the baking soda has dried.
- Don't attempt to scrub stains away from carpets. Scrubbing damages the fibers and makes the area look worse.
- Don't douse the area with too much vinegar, water, or any other liquid. If it seeps too deeply into the carpet to dry, it could lead to mold growth.
- Lighter carpets can be effectively cleaned by applying a mixture of lemon and salt. Do a spot treatment in a discreet area to make sure it doesn't stain your carpet a different color.

How to Select Carpet Steam Cleaner

Do you have to send your carpet to the cleaners every time? If you can't clean it well enough, it might take up cash and time, and it is very inconvenient to carry your large and heavy carpet to the cleaners for it to be cleaned. It might also be impractical to have a carpet cleaner come over to your home when you are at the office and no-one is home.

How to Solve it? One way to solve this problem is to buy your own carpet steam cleaner. Even without an expert cleaner, you would be able to clean the carpet during your free time. You only need to buy the best carpet steam cleaner that would suit your needs.

What is a Carpet Steam Cleaner?

Carpet Steam Cleaners, from the word itself, are machines mainly used to clean carpets. A carpet steam cleaner basically works by spraying hot or warm water and detergent to clean your carpet fibers and then rinse it with water only. Afterwards, the vacuum of the machine sucks the water on your carpet.
While carpet dry cleaning is also efficient, it uses strong chemicals that might be harmful for you and your carpet; where as for steam cleaners, you would only need to use hot water and detergent. A carpet steam cleaner may have a heating element while for some, you would have to manually add your hot water. Some also have a mechanism that mixes the water and solution; you wouldn’t have to mix it yourself.

Who Needs a Carpet Steam Cleaner?

Do you have a carpet cleaning business? Or are you that one who doesn’t want to pay for a rental service to have your carpet cleaned? Are you a busy bee who needs a more convenient and faster tool to clean your dirty or stained carpets? Then, you might need a Carpet Steam Cleaner! Read Full articles and features that You Should Look for
Refer :http://www.wikihow.com/Clean-Carpets
http://carpetsteamcleaner.dotd4u.net/

Read More

How to Staining Wood

Woodworking Tips- Sharpen your woodworking skills with helpful. tips and techniques. Today I found many articles about woodworking, here is some part of the woodworking tips from howtonestforless.com.  Sometimes a little bit of stain can go a long way! So here’s some great tips and tricks for staining your furniture into perfection…

1. Stain comes in oil or water-based products. Oil stains have longer drying times, which will come in handy if you’re working on larger projects like floors, paneling and doors. Water based stains are low odor and fast drying which will allow you to stain and finish within 24 hours.
2. Oak is the easiest wood to stain. Pine make look great, but can often stain unevenly (especially due to the knots).
3. Use a pre-stain conditioner that’s water-based. It’s gonna be like your $5 insurance policy. Use a foam brush to apply a thin coat and let it dry about 3-4 minutes before applying your stain. Give it a light sanding before staining, too.
4. Apply a liberal amount of stain in sections and wipe with a rag. Remember the longer you leave on stain, the darker it will get.
5. Always stir your stain before staining since some of the color pigments can settle at the bottom of the can. And never shake your stain!
6. Sand before you stain and always sand in the direction of the grain with a light 180 grit sandpaper. Oh, and never sand after you stain either!
7. Apply a top coat after you stain your wood. A water-based polycrylic is best! And yes, you can use a water-based top coat even if you’re using an oil-based stain.

8. Don’t apply stain too thickly. Leaving extra stain on top of your project will just peel off later. Instead use multiple coats to achieve a darker look.
9. You can use a foam brush to apply your stain before you wipe off, but do not use a foam brush for your finishing coat!
10. Looking for a stain and finish in one step? Try the new Minwax Express Colors! It’s like a cream that you can wipe off quickly with a rag and you’re good to go. It comes in 4 colors and 4 wood tones. Love the finished look! Or you can use Minwax Polyshades which is the stain and polyurethane in one step in liquid form.

Now of course there are a bunch of other stains and polyurethanes on the market, but Minwax just happens to be my favorite! Plenty of color options and it’s just a name I trust!
Refer :  http://howtonestforless.com/2012/07/18/staining-101/

Read More

Woodworking Safety Rules - You must know

Woodworking Safety Rules – You must know, How To Be Safe While Working With Woodworking Tools? To avoid accidents, woodworking safety must be paramount in one’s mind at all times when working with tools or equipment. Here is the short note that I read and like.

You must have knowledge of or have been trained to use and always read and understand the owner’s manual prior to using a tool or piece of equipment. Some Woodworking Safety Rules that every woodworkers must follow show as below.

• Safety With The Table Saw - Did you know that it is also the most dangerous, you can greatly reduce you chances of becoming another workshop statistic. 
• Always Wear Safety Gear - Seems like an easy thought I know.  
• Keep A Clean Work Area - When you are using your table saw, you must make sure that your work area is free from any debris.  
• Always Check Safety Features before you begin anything with your table saw.
• Never Free Cut - One of the most dangerous mistakes I hear about from other woodworkers.
• Check For Foreign Objects before you begin any cut.
• Disconnect Power Before Changing a Blade 

Lack of thorough training on the specific system of safety and health signs and signals plays the pivotal role in furnishing the accidents in the woodworking sector. The risks associated with the use of woodworking machinery are high since they rely on high-speed sharp cutters to do the job and in many cases, these are necessarily exposed to enable the machining process to take place.

Finally, make woodworking safety a habit, and you’ll be much less likely to encounter a problem when woodworking. Safe and enjoy your hobby or vocation.
Read Full Article :

• Woodworking Safety Rules
• Step by Step Woodworking Plans
• Wood Profits

Read More